TECNOCOAT

Hot spray coatings
DESMOPOL

Liquid membranes
TECNOFLOOR

Flooring systems
TECNOFOAM H2O

Polyurethane spray foam water based
TECNOFOAM HFO

Polyurethane spray foams, HFO gas based
TECNOFOAM I

Injection polyurethane foams

PRIMER

Primer range
TECNOTOP

Aliphatic top coats
SUBSTRATE PREPARATION

Products for reinforcement, joints and singular points

ADDITIVES
FILLERS

Tecnoband 100

TECNOBAND 100

Geotextile reinforcement band

A transversely deformable adhesive band, formed of a viscous-elastic layer coated on a nonwoven mesh. The nonwoven element allows adaptation to the support of the band and is highly recommended for specific applications of polyurea membranes Tecnocoat.



Uses

For application in the following situations

  • Use this product to protect Tecnocoat systems on joints areas (concrete elements), metallic overlappings
  • Nonwoven support for adaptation to the shape of the support and is highly recommended for liquid polyurethane applications and polyurea membranes Tecnocoat.

NOTE: call our technical department about the application to other substrates or scopes of use

thickness ± 0.9 mm
pelage at  90 º on steel MEL 052 > 4 N/cm
shock action at -30ºC D42 1313 No detachment 
application temperature  + 5 ºC < Tº < + 40 ºC
service temperature - 30 ºC < Tº < + 90 ºC


TDS. Technical Data sheet(PDF)
MSDS, CERTIFICATES, APPROVALS...(link)

GENERAL SPECIFICATOINS

NON-WOVEN COATING

  • Fiber nature: polyester 100%
  • Mass per ² D 45 1012: 30 g/sqm
  • Breaking strength Slitting: 120 N/5cm
  • Perpendicular Court: 12 N/5 cm

MASTIC FEATURES

  • Stability ponderable (% loss) NF P 85-515: <1%
  • Resistance to flow of butyl at 5 ° C ISO 7390: <3 mm
  • Resistance to flow of butyl at 70 ° C ISO 7390: <3 mm

TECNOBAND 100 COMPLEX

  • Thickness: 0.9 mm
  • Coat on steel at 90 ° MEL 052:> 4 N / cm
  • Crashworthiness at -30°C D42 1313: It is clear
  • Spill hot (Perforated Plate Method) D 45 5256: No spills
  • Application temperature: + 5 to 40ºC    (41 to 104ºF)
  • Temperature: - 30 to 90ºC   (86 to 194ºF)

PACKAGING

Boxes of 8 rolls;15 m. each roll.

SHELF LIFE

Store between 5 and 30°C (41 to 95 ºF) and protect from heat. The product will keep 36 months under these conditions and in original packaging.

APPLICATION METHOD

  • The substrate must be clean, dry, and free of dust and grease or incompatible with the sealant materials (asphalt, tar, etc.).
  • Check the consistency of putty with the media in terms of adhesion and chemical controlling the temperature of product use.
  • Separating the protective position of the product on one of the elements preventing the formation of air pockets.
  • Submit and click on the product, compressing it to ensure good tightness and adhesion. When the product has to overlap, respecting a security length of 5 cm.
  • It can be painted, however, these paints must be compatible with the chemical nature of the latter.
  • The product is sensitive to solvents.