TECNOCOAT

Hot spray coatings
DESMOPOL

Liquid membranes
TECNOFLOOR

Flooring systems
TECNOFOAM H2O

Polyurethane spray foam water based
TECNOFOAM HFO

Polyurethane spray foams, HFO gas based
TECNOFOAM I

Injection polyurethane foams

PRIMER

Primer range
TECNOTOP

Aliphatic top coats
SUBSTRATE PREPARATION

Products for reinforcement, joints and singular points
ADDITIVES

FILLERS

PIGMENTS COLOR

PIGMENTS EP

Specific colorant for Tecnofloor T-3020 N epoxy resin

Mastic pigment designed for pigmentation-coloration of neutral epoxy resins Tecnofloor T-3020 N, according to the RAL Chart (except metallic range)



Uses

For application in the following situations:

  • Pigment dispersion for coloration of our neutral color epoxy resins Tecnofloor T-3020 N

NOTE: call our technical department about the application to other substrates or scopes of use

 

cleaning Desmosolvent
mixing ratio 20% on the weight of the resin (neutral version)


TDS. Technical Data sheet(PDF)
MSDS, CERTIFICATES, APPROVALS...(link)

GENERAL SPECIFICATIONS

  • Epoxy-based pigment paste
  • The correct coloring and formation of the resin is only guaranteed with the mixing ratio of the amount of pigment delivered.
  • The cleaning of the materials is carried out with our solvent Desmosolvent
  • It comes in approximate colorations of the RAL chart (non-metallic).

PACKAGING 

Metal tins of 2 kg., or variable in weight according to demand.

SHELF LIFE

12 months for each product at temperatures between 5 and 35° C (41 to 95ºF), provided it is stored in a dry place. Once the tin has been opened, the product must be used.

MIXING PROCEDURE

These are the steps for the correct mixing:

  • Add Pigments EP to the component A of Tecnofloor T-3020 N (20% of Pigments EP to the weight of Tecnofloor T-3020 N)
  • Mix using a low-speed electrical device, during the time necessary to obtain a colored mixture homogeneously.
  • Add component B of Tecnofloor T-3020 N and stir (with a low-speed electrical device)
  • The correct coloring and performance are guaranteed with the correct mixing ratio only with the pigment delivered by TECNOPOL SISTEMAS S.L.U.
  • Cleaning materials are made with our solvent Desmosolvent
  • It comes in approximate coloration of the RAL chart. (except the metallic range)

HEALTH AND SAFETY

Consult material and safety data sheet (MSDS),  or contact our technical department.

TECHNICAL AND CHEMICAL PROPERTIES

PROPERTIES

VALUES

Density white/red tile 8004 /grey 7042/blue 5012     ISO 1675

±1.5~2 g/cm³ / ±1.1~1.2 g/cm³ / ±1.0 g/cm³ / ±1.0 g/cm³ ±0.1  
VOC(volatile organic compounds) 280 g/l

Appearance

pasty

Viscosity   ISO 2555

< 5,000 cps

% pigment contents white / red tile8004 / grey 7042 / blue 5012

65% / 52% / 50% / 45%

Particle size

<20 µm

Results were performed in the laboratory at 23ºC (73ºF) and 50% RH, under controllable conditions. These values may vary depending on the application, climatology, or substrate conditions.